Fortress Foundation Solutions Before & After Photos

This garage in Warrenton had a sunken corner with giant cracks. Fortress was able to take care of this issue by using the PolyLevel Injection System to raise and level the corner.

The garage of this home in Warrenton had badly sunken and cracked, and really needed our help!

Our System Designer, Zach Bullock, went out to assess the garage and determined that our PolyLevel Injection system would be able to lift that concrete up.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.

This homeowner in Warrenton contacted Fortress Foundation Solutions because they had some concerns about their foundation. There were several stair-step cracks on the outside walls of the house. 

Fortress solved this problem by installing our Push Piers. Push Piers feature a patent-pending external sleeve that strengthens the pier at the critical tension point below the bracket. They are installed next to the footings and attached with a heavy duty steel bracket. Soil is backfilled around the piers once stabilization and lifting is complete to finish the installation. 

He's had an engineer come out who recommended us. All brick ranch home has broken/sinking footing. Interested in push piers.

They had gaps in the walls and windows that would not operate.

We went out and were able to lift the house 2.5 inches which closed the gaps in the walls and now they are able to open and close

windows that weren't functional.

 The homeonwers were very excited that they had us come out and do this work for them.

This basement is partially finished but being used as a rec room and office. Water was coming from many places. Fortress Foundation Solutions installed a perimeter french drain system, CleanSpace wall, TripleSafe sump pump and battery backup with external discharge.