Chris Guill

This homeowner was concerned about a musty odor coming from their crawl space.

Our System Designer, Chris Guill went out to their home to evaluate the situation they were having. He concluded that the crawl space would need a complete encapsulation.

With a plan set, Nick Mori and his production team came to the home and installed Drainage Matting, our CleanSpace Vapor Barrier, and Rim Joist insulation.

This crawl space in Mount Airy was having issues with water getting into it. The homeowner decided it was time for a change so they called Fortress Foundation Solutions. We installed our Clean Space vapor barrier to seal off the area from any moisture. We also added a Sani Dri Sedona dehumidifier to control humidity levels

This homeowner in Mount Airy reached out to Fortress Foundation Solutions because they wanted a cleaner, sealed crawl space.

Fortress installed a complete CleanSpace encapsulation, SilverGlo Wall Insulation, and a SaniDry Sedona dehumidifier. This crawl space is now a sealed, cleaner, brighter space!

This crawlspace in Winchester had several issues. The insulation was falling, there was water and mud everywhere, and mold was growing. Fortress installed a CleanSpace Encapsulation with a SmartSump System to ensure the crawlspace stays clean and dry.

The crawl space of this home in Winchester was wet and musty, and really needed some help!

Our System Designer, Chris Guill, went out to assess this crawl space and recommended that the best solution would be to install a complete CleanSpace encapsulation, along with a SmartSump sump pump and a SaniDry Sedona dehumidifier.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. Together, these products will ensure that this crawl space will remain clean and dry!

This home’s large crawlspace caused numerous problems for its homeowner. The space was damp, moist, and extremely dirty. Insulation was hanging down from the ceiling. The entire space was dusty and dirty. And water stains were all over the concrete blocks causing efflorescence and mold to be found on the walls and ceiling. Water was clearly not exiting this crawlspace properly. Even though this space needed multiple installations, Fortress Foundation Solutions was able to get the job done! In this 5 day install, Fortress provided this homeowner with solutions to transform her crawlspace. First, Fortress removed all of the debris and insulation from the space. After the space was clear, we then covered the ground, columns, and walls with CleanSpace drain matting. An interior drainage system, EZ Flow, was installed to help remove the unwanted water which was settling in the crawlspace. Two exterior drainage solutions were provided, the IceGuard and Lawnscape; these products remove the water from the crawlspace and allow it to travel further from the home. This ensures that the water will not seep back into the crawlspace. All of this water was pumped out of the crawlspace via a SmartSump. A Sanidry XP was installed to counteract the high humidity level (which was causing the mold to grow). Lastly, Fortress sealed all of the crawlspace’s vents with CleanSpace and installed an Everlast crawlspace door.

The crawl space of this home in Stanley was wet and musty, and really needed some help! The homeowner reached out to Fortress Foundation Solutions to get these problems resolved.

Our System Designer, Chris Guill, went out to assess this home and determined that the best solution would be to install a complete CleanSpace encapsulation, SilverGlo Wall Insulation, a SmartSump sump pump, and a SaniDry Sedona dehumidifier. These products will work together to keep all water and moisture out of the crawl space, keeping this space clean and dry!

This homeowner came to Fortress Foundation Solutions because their basement was severely water damaged from repeated flooding. The basement had a cheap sump pump already installed that had stoped working years ago. Fortress installed a full perimeter WaterGuard with a SuperSump Plus System. This combo will keep the basement clean and dry and last for many years to come!

This home in Rockingham had steps that were sinking and pulling away from the home, becoming an eyesore.

Our System Designer, Chris Guill, went out and determined that our PolyLevel Injection System would be able to lift those steps back up to their original position.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.

The basement of this home in Harrisonburg had a problem with water seeping in during long periods of rain. The homeowner reached out to Fortress for a solution to their problem.

Our System Designer, Chris Guill, went out to assess this home and determined that the best solution would be to install our WaterGuard XL System along the perimeter of the basement, along with a SuperSump sump pump.

Our WaterGuard System is designed to capture any wall or floor seepage before it reaches the basement floor, any water will then drain to the SuperSump and be pumped out of the home. Together these products will ensure that this basement will remain dry all year long!

This home in Rockingham had a sidewalk and step that was sinking and settling, becoming an eyesore.

Our System Designer, Chris Guill, went out and determined that our PolyLevel Injection System would be able to lift that area back up to it's original position.

The foreman for this, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed. 

This customer called Fortress Foundation Solution with a leaking, cold crawlspace that had water damage and standing water. To solve these problems, The Fortress Team installed a CleanSpace Encapsulation with Foamax Insullation. We also installed a SaniDry Sedona and a Condensate Pump to ensure the crawlspace would stay dry.

A crawlspace with mold can be very dangerous, like this one in Charlottesville Virginia. The mold was due to moisture getting in to the crawlspace from an unknown location. Fortress Foundation Solutions sealed off the area with our Clean Space liner and put a SaniDry Sedona dehumidifier to make sure this space stayed dry and moisture free!

The crawl space of this home in Charlottesville was damp and musty, and needed some help!

Our System Designer, Chris Guill, went out to assess this crawl space and recommended that the best solution would be to install a complete CleanSpace encapsulation, along with SilverGlo Wall Insulation, and a SaniDry Sedona dehumidifier.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. These products will work together to ensure that this homeowner now has a crawl space that stays clean and dry!

This homeowner in Charlottesville reached out to Fortress Foundations Solutions because the floors of their home were sagging, and they wanted to get them supported before it became a bigger foundation issue.

Our System Designer, Chris Guill, went out to assess this home and determined that the best solution for this sagging floor issue would be to install the SmartJack System. The SmartJack system permanently lifts and stabilizes existing beams and floor joists in your crawl space, lifting and leveling the floors of the home! This homeowner can now be confident knowing that their home is permanently supported and stabilized!

The crawl space of this home in Charlottesville was damp and musty, and needed some help!

Our System Designer, Chris Guill, went out to this assess this crawl space and recommended that the best solution would be to install a complete CleanSpace encapsulation, along with a SaniDry Sedona dehumidifier.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. Together, these products will ensure that this crawl space will remain clean and dry!

The basement of this home in Charlottesville had water seeping in along the foundation with rain. The homeowner reached out to Fortress for a permanent solution on how to keep their basement dry.

Our System Designer, Chris Guill, went out to assess this home and determined that the best solution would be to install our WaterGuard XL System along the perimeter of the basement, along with a TripleSafe sump pump.

Our WaterGuard System is designed to capture any wall or floor seepage before it reaches the basement floor, any water will then drain to the TripleSafe and be pumped out of the home. Together these products will ensure that this homeowner will never again have to worry about a wet basement!

The basement of this home in Charlottesville had water seeping in with rain. The homeowner reached out to Fortress for a permanent solution to this problem.

Our System Designer, Chris Guill, went out to evaluate this home and determined that the best solution would be to install our WaterGuard XL System along the perimeter of the basement, along with a TripleSafe sump pump, and a SaniDry XP dehumidifier.

Our WaterGuard System is designed to capture any wall or floor seepage before it reaches the basement floor, any water will then drain to the TripleSafe and be pumped out of the home. These products will work together to ensure that this homeowner will never again have to worry about a wet basement!

This homeowner called Fortress Foundation Solutions with foundation settlement problems shown by the several cracks both inside and outside of the house. The Fortress Team solved this problem by installing sixteen Push Piers around the outside of the house. 

This basement in Palmyra, VA had some water getting into the home at the seams of the walls. To stop this, Fortress installed our Water Guard French drain system at the footer of the foundation. 

Home owner in the Staunton area called us with some cencerns of mold and mildew affecting their allergies and expressed interest in encapsulating their crawlspace.

This sidewalk at this house in Staunton was cracked and uneven. This is a tripping hazard that could cause injury if not taken care of. Fortress leveled this sidewalk by using the PolyLevel Injection System. Now the concrete is even and no longer a tripping hazard.

The sidewalk of this home in Lyndhurst was sinking and settling, becoming an eyesore. The homeowner reached out to Fortress Foundation Solutions to have that area lifted and leveled. Our foreman, Brian, and his crew went out and used our PolyLevel Injection System to lift that area back up. 

This crawlspace in Lovingston was dirty and moldy from repeated flooding. Fortress installed a CleanSpace Encapsulation with a SmartSump Sytem to ensure that the crawlspace will never flood again.

The crawl space of this home in Lovingston was wet and musty, and really needed some help!

Fortress went out and installed a complete CleanSpace encapsulation, along with a SmartSump sump pump.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. These products will work together to ensure that this homeowner now has a crawl space that stays clean and dry!

This crawlspace/basement in Greenville was dirty and water damaged from repeated flooding. Fortress solved these issues by installing a CleanSpace Encapsulation with a TripleSafe Sump System. 

This Greenville basement ws experiencing water seeping through the walls. Fortress Foundation SOlutions installed our Water Guard system at the footer of the wall to catch any water coming into the home, we also added a Triple Safe sump pump to pump all of the water from the drain system to the outside of the home. No more leaking walls!

This homeowner called Fortress Foundation Solutions with standing water and old insulation in their crawlspace. Fortress solved these problems by installing a CleanSpace Encapsulation with a SmartSump System. We also installed Foamax Insulation and an IceGuard to ensure the crawlspace would stay warm and dry all-year-round.

The crawl space of this home in Buena Vista was wet and musty, and needed some help!

Fortress helped this homeowner by installing a complete CleanSpace encapsulation, along with a SmartSump sump pump.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. These products will work together to ensure that this homeowner now has a crawl space that stays clean and dry!

The sidewalk in front of this home in Monroe, Virginia was sinking and separating. Fortress used the PolyLevel Injection System to lift the sidewalk up to it's original position.